Skip to main content

Power Team Perfect Canister Vacuum: Same Design, New Performance

The Power Team Perfect Canister Vacuum was designed to emulate the look and power of an old Electrolux model that was extremely popular. However, this Perfect canister vacuum is filled with modern components to ensure that you get an even better performance than the old classic model.


Just like the old Electrolux vacuum, these models have an all-metal housing that protects it from the use and abuse that it will receive over the years. This is an extremely durable vacuum, and as long as you make an effort to maintain it, you’ll be able to count on it for many years to come.


Not every vacuum is perfectly suited for every job, and it’s important to look at the features before you decide which model to purchase. Some people may prefer an upright vacuum to a canister model, while other situations may call for a central vacuum. The Power Team Perfect Canister Vacuum offers:


• All-metal housing with chrome highlights
• 15" power nozzle specifically designed to get deep in the carpet and remove pet hair
• Non-marking rubber wheels that are safe to use on almost any surface
• Foot operated on/off switch
• Circuit breaker that will make sure you don’t suck up items that could damage the inner workings of the vacuum
• Automatic cord rewind
• Vacuum bags with a HEPA filtration system to trap the fine particles that aggravate asthma and allergies


There are also a range of accessories that can enhance your Power Team Perfect Canister Vacuum, such as the 12" soft horsehair brush for bare floors, the 14" crevice tool to get the hard-to-reach places, and an air-driven stair tool that is designed to make the job of vacuuming stairs much easier.


If you had one of those old Electrolux vacuums and are looking for a replacement, or just want to switch over to a canister vacuum, this may be a great way to go. This vacuum has taken a good thing and built on it to make it even better.
Labels:

Comments

Post a Comment

Popular posts from this blog

Central Vacuum Cleaners

Central vacuum cleaners also referred to as a built in vacuum cleaners consist of a vacuum power unit which is typically installed in a utility room, garage, or closet; and a 30-35 foot hose which is plugged into a inlet valve which is in the wall or floor; you can then attach any vacuum cleaner attachment to the end of the hose, such as a power nozzle, floor brush, dusting tool, upholstery tool, and crevice tool. Central vacuum cleaners are more effective than traditional HEPA filters, if they are exhausted outdoors. Therefore there will be no emission emitted back into your indoor environment, leaving you a cleaner healthier home. The dirt travels through the wall and collects into a drum which is part of the power unit, and is typically empitied on a semi-annual basis. Central Vacuum Cleaners can be installed in both new construction and existing homes. Check out our installation materials and the Vacpan and the Drawer vac at http://www.evacuumstore.com/central-vacuums
Post a Comment
Read more

Electrolux Vacuum Cleaners

Our customer service reps. are very knowledgeable about all of the Electrolux Vacuum Clenaers models ever made. For all of your Electrolux Vacuum bags, filters, parts, accessories, and more we carry it at discounted prices. http://www.evacuumstore.com/ New home builders and existing home owners can also install an Electrolux Central Vacuum into their home. The new Electrolux Central Vacuum now talks to you and comes in three sizes. We will soon have vacuum cleaner parts diagrams and schematics for many of the Electrolux models. Our exclusice diagrams will detailed all the parts for the featured models. http://www.evacuumstore.com/
Post a Comment
Read more

How to Change an Electrolux Central Vacuum Motor

For Electrolux Central Vacuum models 1561, 1569, 1580, 1584, 1590, 1590A, E117A, E130A, E130B, E136G, E130J Unplug the canister and remove the 24 volt wiring. Using both handles on the dirt bucket, slide the canister stright up off the mounting brackett, and place the machine on the ground. Remove 3 small screws from the top of the of the canister, and then remove the top cover. You should now be able to access the motor. Now remove the 3 bolts on the motor, and unhook the motor contacts. After this is done you will now be able to remove the motor. Also remove the coupling on the horn of the old motor and place on the new motor. Clean the screen bleow the motor if necessary. When putting in the new motor make sure there is a gasget between the motor and the canister create a tight seal, then tighten the bolts and reconnect the motor terminals. Put the top cover back on and put the machine on the wall.
Post a Comment
Read more